SD36G5M

How to enable Viiv in SD36G5M?

The Viiv Technology equirement list as following:
Process: Pentium D processor
Chipset:Intel 945G + ICH7DH
LAN Chip: Interl PRO Client LAN
Audio require: High Difination Audio
Hard drive: SATA interface and support NCQ
Operating system: Microsoft Windows XP Media Center Edition Rollup 2

If you have install external PCI-E graphic card, please install with MCE version of video driver


--------------------------------------------------------------------------------

First of all, please update the BIOS version to the latest version and Load Optimized Default after BIOS updated.

Go into BIOS →Integrated Peripherals→OnChip IDE Device change SATA Mode to AHCI.

Enable Quick Resume Technology from Power Management Setup.

Before you have start to install MCE, you will need to papre a floppy drive and the 32bit ICH7R RAID disk that come with accessory box. If you do not have this floppy diskette, you may also download it from our website or driver CD. D:\Intel\F6 install\F6flpy32.exe and answer all prompts presented (Assumes your CD ROM Drives label is D.)

Begin Windows MCE installation

Press F6 function key when the RAID setup message screen come up.

Press S key to select AHCI driver

Insert the floppy disk you just made into the floppy drive.

Select the driver for chipset type "82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)"

AAfter the driver has been selected, press Enter to continue installing Windows MCE..\

Installing All the drivers from CD driver include Quick Resume driver under Windows MCE.

pic

Installing Viiv driver

pic

客服中心資訊

技術諮詢專線：
02-87926168 後續轉1000至維修中心或轉0由總機協助轉接
0800-032-010 (免付費專線服務地區：限台灣地區市內電話。)
服務時間：週一 ~ 週五 上午09:00~12:00、下午13:00~18:00 (週六/週日、國定假日除外)
技術信箱 : 請填寫技術支援表格